droplet造句
31. Molten solder droplet bumping (MSDB) is adapted to the requirement of high-density packaging and has distinctive advantages.
32. The mixture - fraction equilibrium chemistry model and discrete droplet model can predict correctly kerosene spray supersonic combustion.
33. As the inclination angle of condensing surface increased, the condensation heat transfer coefficient increased due to the action of gravity on the departure and motion of droplet.
34. In this paper detection methods of one droplet per pulse are introduced and evaluated.
35. The experimental study of combustion of single COM droplet in the high temperature furnace and of COM spray in the tunnel furnace is introduced.
36. The droplet sizes (VMD) got smaller with the increase of the working pressures, however, got larger with the nozzle cap turning back.
37. The invention provides an inkjet printer that gives an excellent print quality by accelerating the traveling speed of an ink droplet ejected from a nozzle of the inkjet head.
38. Considered terrain condition, a mathematical model of droplet random splash was proposed, and the corresponding differential equation was set up and worked out by Runge-Kutta and Monte-Carlo method.
39. Methods: 1. Electrostatic droplet technique was adopted to fabricate ACA microcapsules with chitosan of different molecular weights and in different membrane-forming time.
40. It is of some characteristics of itself, such as, pyrolysis, obvious coke combustion process and volume expansion of droplet.
41. The model from the perspective of continuous variable dynamic system describing the process of an ink droplet injection.
42. After only one or two trials, many bees learned to stick out their tonguelike proboscis in anticipation of a sugary droplet.
43. The droplet transfer in the twin-wire co-pool gas-shielded metal arc welding(TCGMAW) process greatly affects the welding seam appearance and the welding quality.
44. The water droplet diameter in diesel emulsion was characterized with microphotography and arithmetic statistic mean method.
45. Droplet ignition and extinction in practical combustors are strongly influenced by forced convection and turbulence.
46. It was systematically studied that Na2 SiF6 and fluorite influence on the welding arc stability, welding spattering, slag detachability and the appearance of weld beads and the size of droplet.
47. There are two main groups:" continuous droplet" and " drop on demand". This process can be classified under the group name of "Non impact printing" or "Plateless printing".
48. Vector analysis and shock wave theory are applied to the initial phase during which the contact periphery expands more quickly than the compression wave fronts in the droplet.
49. Second, in the cold season avoids the residual droplet keeping on the oronasal skin the rime, the stimulation and the injure skin or cause the taking a chill cold.
50. The results indicate that the droplet acts as a catalyst rather than an adatom collector.
51. In this paper, a variable model of optimum droplet transfer mode for pulsed GMA welding using a steel electrode is developed on the principle of the micro-interference instability of magnetofluid.
52. The droplets size decreased as the concentration of sodium dodecyl sulfate(SDS)increased, while the concentration of hexadecane had no significant influence on the droplet size.
53. The African Stenocara beetle has become mildly famous for using its wings to capture vapor molecules in the parched Namib Desert air and to herd them into a droplet that rolls into its mouth.
54. The test results showed that increasing droplet size was associated with better stability.
55. Lenard (1915)found that when water is atomized (e. g. on impact of a water droplet), negative and positive charges are SEPARATED.
56. As the surface oxidation, more active metal atoms inner the droplet should diffuse to the surface, which directly influences the relative content of equilibrium phases of alloy droplets.
57. The rate of droplet growth under different conditions can be evaluated.
58. It is shown that stochastic model can describe the droplet turbulent dispersion and is suitable for two phase jet dispersion with droplet vaporization.
59. Through inspection of MSDB process, it can be found that initial temperature of solder droplet is the main influential factors for reliable bump.
60. Does the profit lies, one, prevents the residual droplet stimulation oronasal skin, in order to avoid causes the skin sensibility or suffers injury.
123