droplet造句61. As a result, the mathematical model of piezoelectric actuated micro - droplet jetting process is built.
62. This new approach provides a thoughtful understanding that line tension play an important role in droplet movement and dropwise condensation.
63. The solidification during atomization includes droplet solidification during liquid, recalesced, eutectic and solid.
64. A distribution function of droplet volume was derived using the information entropy.
65. The simulation also shows the tracks of droplets, and the detailed distributions of pressure, velocity, vortex and droplet concentration, which are instructional to the optimal design of demister.
66. The other process of droplet growth is by collision and coalescence.
67. Under the influences of aerodynamic force and electrostatic force, the higher the nozzle pressure and charging voltage are, the smaller the droplet diameter is.
68. METHODS Centrifuge test and the average diameter of droplet were used as the criterion to optimize the formulation and process.
69. Keywords: droplet impact, spray technology, microarray biochip, micro - droplet experiments, theoretical analysis.
70. The results showed that the nozzle type, droplet size, side wind, boom speed and air-assistance were related to the drift potential, but the plant canopy had less influence to the drift.
71. It was systematically studied that Na2SiF6 and fluorite influence on the welding are stability, welding spattering, slag detachability and the appearance of weld beads and the size of droplet.
72. When the droplet number density is big, evaporation rate of the droplets are influenced by the heat transfer process and atomization quality.
73. The mechanism of intensifying action of non-polar oil on hydrophobic flocculation is connection of "oil bridge" and increase of hydrophobicity of particle surface with spread of oil droplet.
74. At last, The droplet sizing system can quantitatively auto - measure the dimension of sprayed droplets scanning pixels.
75. The behavior of droplet of steam-water separator with corrugated plate is simulated by founding a two-phase and three-flow-field numerical model considering to the reentrainment.
76. The nozzle diameter and the ejection pressure have a great effect on the flow rate, droplet cone shape, droplet size and cover area of fluid pesticide.
77. The scientists say the droplet itself becomes a little libratory that can do things like pump separate and mix.
78. Although less spatter, more stable arc, short circuit non-explosive transfer, as a main transfer mode of SSFCW is lack of effective protection for droplet.
79. There exists a lowest temperature, reliable MSDB bump can be achieved only when initial temperature of solder droplet is above this temperature.
80. Two computation theories of critical conditions for ignition of UDMH droplet in an inert atmosphere are presented.
81. The straightforward visualization measurements improved the understanding on the mechanisms of gas-liquid mass transfer and micromixing inside a droplet.