melt造句
(241) Tbe compatibilization of the melt graft of PP with MAH and unsaturated acid on PP/PA6 blend by reactive extrusion was studied in this paper.
(242) Polylactic acid with low molecular weight was prepared by the direct melt polycondensation, then 2,4-toluylene diisocyanate(TDI) was used as chain extender to improve the molecular weight.
(243) In general, the corrosion rate of the alumina refractory and the chrome refractory in the iron phosphate melts was not higher than their corrosion rate in the DWPF melt.
(244) With such thoughts, my 29)citified confusions melt into the quiet of the night.
(245) The recrystallization of semisolid AZ91D alloy made by the stress induced melt activated process(SIMA) and its role to the spheroidization of the alloy are studied.
(246) The deep grief and guilt of the mother as well as the hatred and home-sickness of the daughter permeate the story and eventually melt away due to the abiding family love.
(247) Melt remaining chocolate in the top of a double boiler over medium heat.
(248) It adopts sealed coal-fired crucible to melt aluminium and tilt-up sheet wash heat alumetizing device, and the entire operation is proceeded under the atmosphere.
(249) By observing of the melt course and by analyzing the measurements of glass samples, the feasibility of nepheline syenite as raw materials for the green float glasses was discussed.
(250) The end pressure loss of LLDPE melt in short die extrusion and factors affecting the pressure loss were investigated by using a capillary rheometer.
(251) At the same time, warm Pacific Ocean water is pulsing through the Bering Strait into the Arctic basin, helping melt a large area of sea ice between Alaska and eastern Siberia.
(252) The boundary layer thickness is a function of the convection condition,[www.] in the melt.
(253) Starting from D, Llactic acid and glycolic acid, biodegradable drug delivery material poly(lactic acid-glycolic acid) (PLGA) was directly synthesized via melt polycondensation.
(254) We provide hot melt adhesive: water-based adhesive and PUR adhesive, animal glue products apply for various types of the printing industry.
(255) The DSC parameters show that the cyclic oligomer acts as nucleating agent during the process of PET melt crystallization.
(256) The paper discussed the influences of the melt flow rate, long branched chain and the copolymerized monomer of polyolefin on the melting strength.
(257) With PP chips and antibacterial matrices blent, the antibacterial special raw material with high melt index is prepared for speed spinning.
123456789