workpiece造句
1. Before cutting, he set a workpiece out.
2. This workpiece doesn't need to be cut short.
3. There is no physical contact between tool and workpiece.
4. Besides, the workpiece cost can be saved as the low processing charges of laser.
5. The workpiece was considered as elastomer, and was deformation when clamped both by bench clamp and fixture was simulated with ANSYS.
6. The relative motion between the tool and workpiece during face grinding was analyzed based on the motion diagram of ultrasonic vibration assisted grinding.
7. The workpiece W can be rotated around any desired angle by continuing to rotate the crown gear along with the tension rollers.
8. Especially is suitable for the thin stalloy workpiece and class of pinchcock isothermal quenching.
9. The effect of sliding block feed on the workpiece quality and rolling roller life is analyzed.
10. During machining, ultrasonic vibration of workpiece can improve the machining process.
11. Studies the prediction approach of workpiece in face milling deformation.
12. The results show that the plastic flow of the metal material nearby contact arc area towards free surface of workpiece becomes the burr under the coupling actions of the thermal and mechanics.
13. By installing two photoelectric encoders on the hob axis and workpiece axis, the zero position signals of photoelectric encoders coincident with each mechanical zero of two axis is reasonably set.
14. The design optimization of springback in sheet metal forming process is to control the final shape of the workpiece.
15. Impulse power is linked to the tool electrode and the workpiece. Using automatic feed adjustment device makes the tool electrode and the workpiece all along keep a small discharge gap.
16. A new method measuring contouring error of two - dimensional workpiece using one - dimentsional sensor is advanced.
17. These aggiornamento machines guarantee machining precision and quality of each workpiece, which is the base of guaranteeing assembling quality of machine.
18. The automatic high-speed cushion covering machine is utilized to realize the automatic cushion covering to a steel gun nail workpiece, thereby effectively improving machining efficiency.
19. We can solve the inconvenience in eddy current flaw detector such as detection of circular workpiece, pipe thread and so on.
20. The program has the facility to treat laps that may happen due to buckling of the workpiece surface and causing surface-to-surface contact.
21. Using liquid crystal display numerically - controlled system, which can organize and store various heat-treating process program according to requirements for different workpiece.
22. A modular machine tool for a minicar back bridge leads deformation of the workpiece in machining because of large clamping force.
23. In this paper the extrusion pressure between the stud and the workpiece during stepping arc stud welding process is acted as the controlled variable so as to control the stud plunge depth.
24. This paper advances a new method to machine regular hexagon workpiece by lathe.
25. The coordinate value in NC machining process is related to predetermine position, size, geometry shape of the processing workpiece of the machining.
26. The process features low critical current density for activation and guarantees good adhesion of Cu strike directly plated on iron and steel workpiece to the substrate.
27. Combining the craft features of the parts process, the NC generalized program for typical workpiece is worked out with group technology.
28. This paper presents the computational modeling of milling process. A new method is proposed to predict the workpiece deformation based on the super-element technique of finite element method.
29. A 3D shape inspection system for inside surface of microminiature workpiece based on structured light vision is presented.
30. Induction coil by-pass water-cooled copper coil to just enclose the shape of the workpiece, the gap between it and the workpiece should be as small as possible.
123456