shear造句
61 The present study shows the mechanical properties of homogenate suspension from the leaves and petioles of Mimosa pudica by stress-shear hysteresis loops during shear stress.
62 The purpose of this paper is to find the distribution laws of the shear force between vertical shaft and surface soil, and to lay a foundation for mechanical model of shaft in soil.
63 The direct shear test on rigid presser was carried out to examine the load - deformation curve.
64 The model makes it possible to calculate the macroscopic behaviors of the two-fluid flow, such as effective pressure, effective viscosity and shear viscosity of particle phase.
65 In this paper, based on the study of compressive performance and shear strength of Yellow River silt bearing cellular bricking structures, the study of flexural behavior is also carried on.
66 In that it is flat with little or no shear lips.
67 The shape, thickness, stretch direction and bend type of the texture on both sides of the shear belt were observably different.
68 Increasing the arch thrust augments the shear stress on the surface of the shearing resistance part, which counteracts the influence of the crushed rock.
69 In this paper, the stability and control of a hingeless helicopter in wind shear were investigated.
70 The Qinling Group of Lower Proterozoic is an advantageous environment for metallogenesis and the ductile shear zone is a major structure to control rocks and ores.
71 Two formulae can be used to calculate the shear capacity of steel reinforced concrete beams.
72 The propagation process of the Alfven wave in a shear velocity field is calculated, and the dissipation of Alfven waves in the magnetosphere is given.
73 In fluids, forces of tension and shear can often be ignored.
74 The die set shear that is different from general flying shear is introduced.
75 For gas bearing sandstones , Lame constant will reduce and shear modulus increase.
76 It has been demonstrated that certain parts of the human spine, more specifically the dorsally inclined lower thoracic and high lumbar parts, are subject to dorsally directed shear loads.
77 Angular stiffness and elastomer shear strain on maximum swinging angle are important indexes in flexible joint design of solid rocket motor.
78 Design idea and structure of a new slant shear machine is introduced. The calculable formulas of main parameters are got.
79 Circular hole castellated steel-concrete composite beams are members which are made up of the circular hole castellated beams and the concrete slabs working together by shear connectors.
80 The wall energy saving standard can be reached or exceeded by adopting check block type self-cladding technique for exterior insulation of cast-in-situ reinforced concrete shear wall.
81 This method can be used to analyze shear wall structures with elastoplastic hinges or dampers as well as tall frame-type structures.
82 The intermediate-acid volcanic rock is the main metallogenic mother rock. the ductile-brittle shear zone is the important ore conducting structure for the formation of gold deposit.
83 The deformation mechanism of the ductile shear zones is the simple shearing of plain strain, and the quartz glide system is either of basal glide, or prismatic glide and rhombohedral glide.
84 The location of shear strain rate localization coincides in position with the location of volumetric strain rate, which is the actual failure zone of rock.
85 The shear stress in intervertebral disc mainly distributed in fibrous rings.
86 In the point-supporting glass structures, the glass planes are supposed to bear both the bending load such as wind load and the shear load such as gravity.
87 Evaluation of the life by means of the shear strength of sample which pass through heating oxygen aging test according to environmental test specification was.
88 When the bond between bolt and grout is intact the shear stress distribution of the bolt side is described by exponent curve.
89 Furthermore, the second-order effect and shear deformation of the structures were magnified due to semi-rigid connections, the ultimate load resistance of the structures was reduced simultaneity.
90 The effects of shear stress and oxygen supply on cell growth and taxane production were investigated in 250ml Erlenmeyer flasks.
123456