inert造句
(61) Silicones in general are exceptionally stable and inert.
(62) Elemental nitrogen is a very unreactive and inert material.
(63) Virion The extracellular inert phase of a virus.
(64) Helium is a monatomic chemically inert gas.
(65) Inert the boning, and finish the open end.
(66) Matter is inert, unintelligent. Thought can shape and control.
(67) He lay inert in the sand.
(68) The sewer lines may then become clogged with inert materials.
(69) Top - slag refining process in CAS - OB unit under inert gas protection is introduced.
(70) Nobel incorporated nitro-glycerine into silica, an inert substance, which made it safer and easier to manipulate.
(71) Of spill or leak : flood with water to polymerize. Soak up with an inert absorbent.
(72) The performances of inert membrane reactors (IMR) were compared to that obtained in a conventional fixed bed reactor (FBR).
(73) The dynamite itself is implanted in a matrix of inert materials.
(74) Steam was used as inert diluent, with dilution ratio being 0.5 and kept constant.
(75) Behavior: These elements were considered to be inert gases until the 1960s, because their oxidation number of zero prevents the noble gases from forming compounds readily.
(76) A compressed inert gas a fluorocarbon, that acts a vehicle forthe contents of an aerosol container.
(76)try its best to collect and create good sentences.
(77) So, in the spring , we plunge shovels into the garden plot , turn under the dark compost , rake fine the crumbling clods , and press the inert seeds into orderly rows .
(78) If the thanatos instinct over rides then we end up in a similar state. Everything is destroyed, nothing is created and we end up inert again.
(79) According to Wikipedia, dimethylpolysiloxane is optically clear, and is generally considered to be inert, non-toxic, and non-flammable.
(80) It'should be considered that inert gases will prevent the growth of aerobic microorganisms.
(81) The leak check should be performed with an inert gas, and care should be taken not to over pressurize any components of the system.
(82) Different from the traditional active metal brazing, RAB uses a liquid-phase oxide-metal melt at high temperature and the process does not require a vacuum or inert atmosphere.
(83) Inert gas welding is the preferred method of joining several ferrous and nonferrous alloys.
(84) This process does not remove the inert vegetable matter contained in raw wool fibre.
(85) The resistance loss on coke bed in CDQ chamber is measured, the influence of inert gas cooling quantity, coke size and shape factor on resistance loss is studied.
(86) In large scale operations the pollen may be mixed with inert Lycopodium spores, PVC, starch or talc powder and applied with aspirator-type Japanese apple- pollinators , to save time and pollen.
(87) It is not necessary to replace air with inert gas.
(88) Conveyance of compressed air and inert gas under normal temperature.
(89) The thermal weight loss of asphaltene in the pitch road building oil modified with different additives is studied with derivative thermo -gravimetric analyzer in inert atmosphere.
(90) Two principal hazards exist in dealing with inert gases: asphyxiation and pressure.
1234567